Fix Samsung Galaxy J3 Emerge’s dark screen: We refer to the Samsung Galaxy J3 Emerge’s black screen of death when it stops responding and displays a blank screen with a light blinking at the top of the display (BSoD). Another form of this issue occurs when the phone’s screen is dark but there is no flashing light; nevertheless, a power issue is more likely to be the cause of this. It goes without saying that this issue may only be a firmware issue rather than a physical one, but we won’t know for sure unless we attempt to diagnose the phone.
How to fix the black screen of death issue on your Samsung Galaxy J3 Emerge
Problem: Hi. What should I do if the blue light on my phone is blinking continuously and the screen is blank and unresponsive? The problem started with my Samsung Galaxy J3 Emerge smartphone yesterday. But I haven’t contacted you guys or my provider about it because I’ve been so busy. All I want is your opinion on it, and if you have any suggestions for how to resolve it, that would be great. I would be grateful for anything from you. I’m grateful.
Troubleshooting: The black screen of death isn’t actually a frequent issue, although anyone who has an Android phone could run across it occasionally. The truth is that it doesn’t matter how it happens; what matters is that you know what to do when it does, and that is what this essay is intended to teach you. In light of that. Here is what I advise you to do if your Samsung Galaxy J3 Emerge experiences a black screen of death:
Troubleshoot your Samsung Galaxy J3 Emerge’s dark screen and blue flickering lights: Step 1: Attempt the Forced Reboot method.
In the event that your Samsung Galaxy J3 Emerge has a black screen and blinking lights at the top of the screen, it may simply be a sign of a system crash. In this case, the issue is minor and can be resolved by you without the help of a technician. The process for forcing a reboot is actually the same as the one for removing the battery from a phone that had experienced a system crash. Because the battery on your Samsung Galaxy J3 Emerge isn’t replaceable, the only thing you can do to restart your phone is to press and hold the Volume Down and Power keys simultaneously for 7 to 10 seconds.
Try operating your phone in safe mode in step two
It’s time to attempt booting your Samsung Galaxy J3 Emerge in safe mode to temporarily stop all third-party apps after the first step if your phone still won’t start normally. If so, the issue is caused by one or more of the apps you installed? You must identify the issue as soon as possible so that you may try to come up with a solution that might address it and stop it from happening again in the future.
Start your Samsung Galaxy J3 Emerge in safe mode by following these steps:
- Past the model name screen, press and hold the Power key.
- Release the Power key once the word “SAMSUNG” appears on the screen.
- Press and hold the Volume down key after releasing the Power key.
- Hold the Volume Pressed key down while waiting for the Samsung Galaxy J3 Emerge to fully restart.
- The lower left corner of the screen will show the safe mode icon.
- When you see Safe Mode, let go of the Volume Down key.
If your phone was able to start up in this mode. It is obvious that one or more of the apps you downloaded are to blame for the issue. The following action you should take is to update any outdated apps.
- To access the Apps tray from the Home screen, swipe up on an open area.
- Select Play Store.
- After pressing the Menu key, select My Apps. Select the checkbox next to Auto-update apps under Menu > Settings to keep your programs updated on a regular basis.
- Select one of the following possibilities:
- To update all applications with updates available, tap Update [xx].
- To update a single application, tap a specific application, then hit Update.
Clearing their caches and data or even uninstalling them will help you determine whether the apps you think are the root of the problem actually are.
On a Samsung Galaxy J3 Emerge, how do you remove the app caches and data?
- To access the Apps tray from the Home screen, swipe up on an open area.
- Select Settings > Apps.
- Select the desired app from the pre-selected list by tapping it, or select Show system apps by tapping the three dots symbol.
- Tap Storage
- After selecting Clear Data, select OK.
- Click Clear cache.
How to remove programs from your Samsung Galaxy J3 Emerge
- To access the Apps tray from the Home screen, swipe up on an open area.
- Select Settings > Apps.
- Select the desired app from the pre-selected list by tapping it, or select Show system apps by tapping the three dots symbol.
- Select the program by tapping it.
- Click Uninstall.
- To confirm, tap Uninstall once more.
Step 3: Attempt to restart your Samsung Galaxy J3 Emerge in recovery mode
You should try restarting your Samsung Galaxy J3 Emerge in recovery mode if the safe mode was unsuccessful in allowing it to start up. The hardware on your phone will start up as a result. But the normal interface won’t launch. It should be able to boot up successfully with little difficulty if it’s just a firmware problem. If the operation is successful. You might also try doing a master reset and a cache partition wipe. As long as the problems aren’t too complicated, both are generally effective in solving them, so attempt to follow the instructions below.
How to activate the recovery mode on your Samsung Galaxy J3 Emerge and delete the cache partition
- Either Press and hold the Bixby and Volume Up keys before pressing and holding the Power key or Press and hold the Power Button and Volume Up keys before pressing and holding the Power key.
- Release all keys after the green Android logo appears (the Android system recovery menu options will appear after roughly 30 to 60 seconds with the phrase “Installing system update” still visible).
- To highlight “wipe cache partition,” repeatedly press the Volume Down key.
- To choose, press the Power button.
- To select, press the Power key after selecting “yes” with the Volume Down key.
- The phrase “Reboot system now” highlight when the erase cache partition finish.
- To restart the Samsung Galaxy J3 Emerge, press the Power key.
How to perform a master reset and use the Samsung Galaxy J3 Emerge in recovery mode
- Switch off the Samsung Galaxy J3 Emerge
- Press and hold the Bixby and Volume Up keys before pressing and holding the Power key or Press and hold the Power Button and Volume Up keys before pressing and holding the Power key
- Release all keys after the green Android logo appears (the Android system recovery menu options will appear after roughly 30 to 60 seconds with the phrase “Installing system update” still visible).
- For “wipe data/factory reset” to be highlighted, press the Volume Down key repeatedly.
- To choose, press the Power button.
- Once the phrase “Yes — erase all user data” is underlined, press the Volume down key.
- To choose and begin the master reset, press the Power button.
- “Reboot system now” is highlighted when the master reset finish.
- To restart the Samsung Galaxy J3 Emerge, press the Power key.
READ MORE:
Factory reset your Samsung tablet
FAQ
What does the Samsung Galaxy J3 Emerge’s blue light that blinks mean?
It can show several colors, including blue, red, and green. These hues correspond to your Samsung Galaxy J3 Emerge’s usual notifications and features. The device is turning on or off when it pulses. blinking: while plugged in but not charging, or when the battery is running low.
class="wp-block-heading">fix Samsung Galaxy J3 Emerge’s dark screen: What do blue lights that flash mean?
The post advised treating any vehicle with a flashing blue light like any other emergency vehicle if you see a car, SUV, or truck with one. We’re asking for the right of way. Drivers must stop completely and pull over to the right when it is safe to do so in order to pass safely.
fix Samsung Galaxy J3 Emerge’s dark screen: What causes Samsung Galaxy’s Black Screen of Death?
Additionally, as was already noted, minor problems like incompatible programs and insufficient storage frequently result in the black screen of death for Samsung Galaxy phones. And a straightforward reset or one of the alternatives listed in this tutorial can successfully make the screen functional once more.
Why does my screen suddenly go black?
We’ll examine a few potential causes of a blank or black screen: issues with your screen or monitor’s connection. updating display adapter drivers problems. recent system installations or updates problems.
fix Samsung Galaxy J3 Emerge’s dark screen: How can I get my phone’s blue light fixed?
Most Android devices come with a blue light setting that you can activate by going to Settings and selecting Display. There, under a setting called Night Light or Blue Light. You may change the lighting’s color temperature and specify when you want it to turn on and off.
What does a Samsung Galaxy with a steady blue light mean?
When the Hub is operational, the app will also let you know. However, if the LED remains solid blue for more than five minutes or begins to flash blue, the Hub is having problems connecting. For advice on connecting your Hub. Consult the following article or get in touch with support.
Samsung Galaxy J3 Emerge’s dark screen after water damage
It is better to keep the Samsung Galaxy J3 Emerge in a bag full of rice at least 2 days. The rice will absorb the wetness in the Samsung Galaxy J3 Emerge. After two days take the Samsung Galaxy J3 Emerge out and clean the charging port smoothly. Put the device into charger about 20 minutes. Now power on Samsung Galaxy J3 Emerge. If the issue still disturbs you better to go for the factory reset option.
The final advice is to contact technical person for more steps before any damage.