Install Stock Rom on Wiko Highway Star 4G phone

Install Stock Rom on Wiko Highway Star 4G phone

Install Stock Rom on Wiko Highway Star 4G phone

and we give you all needed files to Flash Wiko Highway Star 4G  and we discuss about errors of flashing Rom and we offer you solutions for those errors. we use Smartphone flash tool but we also give you all Flashing methods and all required files and all available Stock Roms to your phone. If you want to install Rom then you are in right place. so Flash it.

What is Stock ROM?

Stock ROM– Stock ROM is Original ROM/ Official Rom that your phone have. IF you buy a android phone. It have a Stock ROM. Stock ROM is default ROM.

Warranty – Stock ROM does not avoid your warranty. One of the reasons that android people don’t go for Custom ROMs is warranty. If you install custom ROM then your warranty is canceled on time.

Premium Apps – Premium apps is which you did not install apps.  Normally stock ROMs come with unique premium apps to attract customers. These premium apps differ from one mobile vendor to another vendor. These apps can be anything like music players, apps stores, widgets, Track-ID (Sony) ,

Security– in stock ROM, You can be sure that it does not contain/include any spywares, malwares, backdoor,trojan or other malicious tools but Custom Rom

Before Flash Stock Rom on Wiko Highway Star 4G, you should know these things

You can do this if you want to Go back to Custom Rom to Official Stock Rom.
phone’s pc software does not want to install but phone driver must works on your PC without error.
This Stock Rom has to be installed on this model only.

Why I want to Install Stock Rom

When phone does not on.
Install Lollipop on Wiko Highway Star 4G phone

Install Marshmallow Wiko Highway Star 4G phone
When phone does not pass “LOGO” Screen / boot image
When phone get “System errors”
If you think though your phone go crazy / Slow even after performing reset, then you can flash         Stock Rom
When phone broke after rooting.

Install Stock Rom on Wiko Highway Star 4G phone

Requirement for Flashing Official Firmware/ ROM

 USB drivers.
 Enable developer mood and USB Debugging
Smart phone flash tool – link is below
Stock Rom – Link is below

Top Root apps for your phone 

Step 1,

Note – we recommend you to get full  backup before doing this.

Download and install Wiko Highway Star 4G phone USB drivers after that, enable “Developer and Debugging mood

Step 2,

Turn off your Wiko phone and remove the battery.

Step 3,

Download Official Stock Rom For Wiko Highway Star 4G

Download the “Stock Rom” please Find right one. after that extract downloaded SP Flash tool. to extract you will need this software. after extract open Flash tool by pressing “Flash tool.exe”

Install Stock Rom on Wiko phone

Step 4,

After open Sp tool. Click the “Download tab”

Install Stock Rom on Wiko phone

Step 5,

There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Stock Rom folder. some thing like – “#### android catter.txt”

Stock Rom on Wiko phone

Step 6,

Flash Stock Rom on Wiko Highway Star 4G

Final Step. Click the Download button to start Flash. Now connect your Wiko phone to your PC or lap via data cable. after then, press Volume Up or Volume Down until the Wiko phone is detected by your PC. (without battery). after complete Flashing process. SP tool indicate green right.

♥ Note–  What is the Stock & Custom Rom? Firmware? Bootloader?

Flash Stock Rom on Wiko

Step 7,

Now disconnect your phone from PC and insert the battery and switch on the phone.

Errors and Solutions

phone not works after flashing

A : Give it to 5min. because first boot is slow. If not works, then flash it again.

Wiko Highway Star 4G stuck at Bootlogo or Bootloop

A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then slot back. If not works then boot into recovery mood and wipe data. If not works then Try again to install Stock Rom.

shows white screen, divided screen after flashing

Try another Stock Rom.

Wiko Highway Star 4G automatically disconnecting during flashing

Try another data cable.
Try to install Drivers

I can’t Flash Stock Rom

please try again. after did, if does not works then leave a comment with error message


Your downloaded Stock Rom is not capable with your Wiko Highway Star 4G phone. So, find another Stock Rom and Flash again. Before flashing, Try to format.

Initialize scatter file failed. Please check the scatter file name you load is legal/8417

SmartPhone Flash tool doesn’t accept the name format of scatter file. If you not changed the name then you had better install latest SP flash Tool. – Link is above

Error 8038! Android download  pmt is ready and layout has been changed

retry flashing with the other scatter file. If that doesn’t work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing “__NODL_” .


Reset your phone and try to flash another Stock Rom

My phone stuck on boot logo/keep restarting

That means your current Rom is Corrupted or damaged. Now you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom

Fail Errors – 




Reset your phone and try to flash another Stock Rom


use different USB cable
use different Computer


you had better install latest SP flash Tool. – Link is above

More info about errors – Click

If this guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.

About Ramikatz
Ramikatz is a writer, blog hunter, From Asia. He has been interesting about Phone Hardware-software and also PC Hardware-software and SEO for years. This website was invented by him. GoGoRapid receives 250,000+ page views per month. 4k+ subscribers. You can also joint us and adverties with us

Leave a comment

Your email address will not be published.