Flash Stock Rom on Gionee E7 16g
and we give you all needed files to Flash Stock Rom on Gionee E7 16g Device. we discuss about errors of flashing Rom and we offer you possible solutions for those errors – see below the guide
we use Smartphone flash tool but we also give you all possible and available Flashing methods and all available Stock Roms to your phone. Don’t worry If you really want to Flash a Rom then you are in right website. so Flash it.
Before Flash Stock Rom on Gionee E7 16g , you should know these things
♥ You can do this if you want Go back to Custom Rom to Official Stock Rom or reinstall Stock Rom.
♥ phone’s pc software does not want to install but phone driver must works on PC without error.
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ If you want to upgrade your Rom then you have to find upgraded Rom – marshmallow, kitkat .we provide only Official Rom
Install Stock Rom on Gionee E7 16g
Requirement for Flashing Official Firmware/ ROM
Note – we recommend you to get full backup before doing this.
Download and install Gionee E7 16g USB drivers after that, enable “Developer and Debugging mood“
Turn off your Gionee phone phone by pressing Power button and remove the battery.
Download Official Stock Rom For Gionee E7 16g
Download the “Stock Rom” please Find right Stock Rom.
After open Flash tool. There is tab called Download. Click the “Download tab”
after that, There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Stock Rom folder. some thing like – “#### android catter.txt”
Start Flashing Stock Rom on Gionee E7 16g
Final Step. Click the Download button to Begin Flash.
Now connect your Gionee phone phone to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Gionee phone phone is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.
Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Rom.
Errors and Solutions
phone not works after flashing
A : Give it to 5min. because first boot is slow. If not works, then flash it again.
Gionee E7 16g stuck at Boot logo or Bootloop
A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then slot back. If not works then boot into recovery mood and wipe data. If not works then Try again to install Stock Rom.
automatically disconnecting during flashing Gionee phone
Try another data cable.
Try to install Drivers again
I can’t Flash Stock Rom Gionee phone
please try again. after did, if does not works then leave a comment with error message. Had better give us Screenshot.
My phone keep restarting
That means your current Rom is Corrupted or damaged. Now you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom. It may be your phone case is pressing on it
- Try to format your phone using Sp flash tool,
- Find another Rom
- If not works, then open the scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”
If this Flashing Gionee phone guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.