(Last Updated On: October 20, 2019)

Flash Stock Rom on IBall Andi 3 5f grabit

and we give you all needed files to Flash Stock Rom on IBall Andi 3 5f grabit. we discuss about errors of flashing Rom and we offer you possible solutions for those errors – see below the guide

we use Smartphone flash tool but we also give you all possible and available Flashing methods and all available Stock Roms to your phone. Don’t worry If you really want to Flash a Rom then you are in right website. so Flash it.

Before Flash Stock Rom on IBall Andi 3 5f grabit , you should know these things

You can do this if you want Go back to Custom Rom to Official Stock Rom or reinstall Stock Rom.
phone’s pc software does not want to install but phone driver must works on PC without error.
This Stock Rom has to be installed on this model only.
 Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ If you want to upgrade your Rom then you have to find upgraded Rom – marshmallow, kitkat .we provide only Official Rom

Install Stock Rom on IBall Andi 3 5f grabit


Requirement for Flashing Official Firmware/ ROM

 USB drivers.
 
Enable developer mood and USB Debugging
Smart phone flash tool link
Stock Rom – Link is below guide

Increase RAM SIZE in my phone – Need Root


Step 1,

Note – we recommend you to get full  backup before doing this.

Download and install IBall Andi 3 5f grabit USB drivers after that, enable “Developer and Debugging mood

Step 2,

Turn off your IBall phone phone by pressing Power button and remove the battery.

Step 3,

Download Official Stock Rom For IBall Andi 3 5f grabit

Download the “Stock Rom” please Find right Stock Rom.

after that extract downloaded SP Flash tool. (to extract you will need this software). after extract open Flash tool by Clicking “Flash tool.exe”

11111

Step 4,

After open Flash tool. There is tab called Download. Click the “Download tab”

Install Stock Rom

Step 5,

after that, There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Stock Rom folder. some thing like – “#### android catter.txt”

Install Stock Rom

Step 6,

Start Flashing Stock Rom on IBall Andi 3 5f grabit

Final Step. Click the Download button to Begin Flash.

Flash Stock Rom

Now connect your IBall phone phone to your PC or lap via data cable. after then, press Volume Up and Volume Down until the IBall phone phone is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.

♥ Note–  What is the Stock & Custom Rom? Firmware? Bootloader?

Flash Stock Rom

Enable OTG in IBall phone – Need Root

Step 7,

Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Rom.



Errors and Solutions

phone not works after flashing

A : Give it to 5min. because first boot is slow. If not works, then flash it again.

IBall Andi 3 5f grabit stuck at Boot logo or Bootloop

A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try again to install Stock Rom.

automatically disconnecting during flashing IBall phone 

Try another data cable.
Try to install Drivers again

I can’t Flash Stock Rom IBall phone

please try again. after did, if does not works then leave a comment with error message. Had better give us Screenshot. 

My phone keep restarting

  • It may be your IBall Andi 3 5f grabit case is pressing on it
  • May be, your current Rom is Corrupted or damaged. So you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.

PMT changed Error

  • Try to format your phone using Sp flash tool,
  • Find another Rom
  • If not works, then open the scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”

Other error messages and Solutions ..

Below we listed errors of SP Flash tool and there is a link to fix these errors.  Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize scatter failed,Error 0X411,

B8038! Android download  pmt is ready and layout has been changedLED
BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
ROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) 

BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

S_FT_DA_NO_RESPONSE or 
BROM ERROR : S_DA_SDMMC_WRITE_FAIError
BROM ERROR : S_FT_DOWNLOAD_FAIL (2004),
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005),

BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
BROM ERROR : S_FT_DA_NO_RESPONSE (0xFA1)

BROM ERROR:S_COM_PORT_OPEN Fail(1013)
BROM

ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020),
BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007),
BROM ERROR: S_STORAGE_NOT_MATCH (3182),

BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00,
BROM ERROR: S_TIMEOUT (1042)

If you face this kind of error message then this is the place for fix it. Go to this dedicated post



If this Flashing IBall phone guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.