Flash Stock Rom on Huawei P9 Plus VIE-L29
and we give you all needed files to Flash Stock Rom on Huawei P9 Plus VIE-L29 Dual SIM . we discuss about errors of flashing Rom and we offer you possible solutions for those errors – see below the guide
you can also Flash Stock Rom using SP Flash tool. Sp flash tool is a Computer Software and it can Flash Stock Firmwares on Only MTK Chip set android Devices.. in this post we do this manually using Micro SD card
Before Flash Stock Rom on Huawei P9 Plus VIE-L29 , you should know these things
♥ You can do this if you want Go back to Custom Rom to Official Stock Rom or reinstall Stock Rom.
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ If you want to upgrade your Rom then you have to find upgraded Rom – marshmallow, kitkat .we provide only Official Rom
Install Stock Rom on Huawei P9 Plus VIE-L29
Requirement for Flashing Official Firmware/ ROM
♦ Battery 50% +
♦ Micro SD memory card
♦ Stock Rom – Download
we recommend you to get full backup before doing this.
Download Official Stock Rom For Huawei P9 Plus VIE-L29
Download Huawei P9 Plus VIE-L29 Stock Rom to Computer. use this link and choose one Stock Rom.
Go to SD card and create New Folder and rename it “Dload”
- Connect your phone to Computer
- Now, Copy Downloaded Stock Rom and paste it to “SD card/Dload” Folder.
after copy, turn off your Huawei P9 Plus VIE-L29 h30 t10 by pressing power key.
Start Flashing Stock Rom on Huawei P9 Plus VIE-L29
Now, Press Volume Up + Volume Down + Power key together for 8 seconds until appear update process. normally. update process take 5-10min to complete its job.
after completed Update process, your Huawei will reboot automatically. after then you can use your android phone
Congratulations, Now you successfully installed Stock Rom.
Another way of installing Stock ROM on Huawei P9 Plus VIE-L29
Take your phone and Create a new folder on your micro SD and rename it to “dload”
Now, Copy the Downloaded “UPDATE.APP” (Stock Rom) and past it to the dload folder on DS card,
Final step is, Go to Settings –> About Phone/Updater –> press “Local Update” to start the flash process.
Now Choose the download file and device will be updated with stock ROM.
Errors and Solutions
phone not works after flashing
A : Give it to 5min. because first boot is slow. If not works, then flash it again.
Huawei P9 Plus VIE-L29 stuck at Boot logo or Bootloop
A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try again to install Stock Rom.
Q : progress bar load to middle process but freez/stuck and then show me a message ‘update failed’
A : Use correct Stock Rom.. Use SD card to create dload.. try with SP Flash tool
automatically disconnecting during flashing Huawei phone
Try another data cable.
Try to install Drivers again
Try above method (using SD card)
I can’t Flash Stock Rom on Huawei P9 Plus VIE-L29
please try with SP Flash tool. after did, if does not works then leave a comment with error message. Had better give us Screenshot.
My phone keep/continuosly/auto restarting
- That means your current Rom is Corrupted or damaged. Now you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.
- It may be your phone case is pressing on it
If this Flashing Huawei phone guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.