(Last Updated On: October 25, 2019)

Flash Custom Rom on Acer Liquid Z200

we use Smartphone flash tool but we also give you all possible and available Flashing methods and all available Custom Roms to your Acer Liquid Z200 . we discuss about errors of flashing Rom and we offer you possible solutions for those errors – see below the guide. Don’t worry If you really want to Flash a Rom then you are in right website. so Flash it.

Before Flash Custom Rom on Acer Liquid Z200 , you should know these things

You can do this if you want Go back to Custom Rom to Custom Rom or reinstall Custom Rom.
♥ This Custom Rom has to be installed on this model only.

phone’s pc software does not want to install but phone driver must works on PC without error.
♥ SP Flash tool works on MTK Device only.. you had better check it first..
 If you want to upgrade your Rom then you have to find upgraded or Custom Rom – marshmallow, kitkat,Nougat .(we provide only Rom)
 Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.

Install Custom Rom on  Acer Liquid Z200


Requirement for Flashing Firmware/ ROM

 USB drivers.
Smart phone flash tool – link

Increase RAM SIZE in my phone – Need Root


Step 1,

Note – we recommend you to get full  backup before doing this.

Download and install Acer Liquid Z200 USB drivers

Step 2,

Turn off your Acer phone phone by pressing Power button and remove the battery.

Step 3,

Download firmware Rom For Acer Liquid Z200

Download the “Custom Rom” please Find right Custom Rom.

after that extract downloaded SP Flash tool. (to extract you will need this software). after extract open Flash tool by Clicking “Flash tool.exe”

11111

Step 4,

After open Flash tool. There is tab called Download. Click the “Download tab”

Install Stock Rom

Step 5,

after that, There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Custom Rom folder. some thing like – “#### android catter.txt”

Install Stock Rom

Step 6,

Start Flashing Custom Rom on  Acer Liquid Z200

Final Step. Click the Download button to Begin Flash.

Flash Stock Rom

Now connect your Acer phone phone to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Acer phone phone is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.

♥ Note–  What is the Stock & Custom Rom? Firmware? Bootloader?

Flash Stock Rom


Read more
Increase Internal Rom SIZE after Flash Rom

Step 7,

Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Custom Rom.



Errors and Solutions

phone not works after flashing

A : Give it to 5min. because first boot is slow. If not works, then flash it again.

Acer Liquid Z200 stuck at Boot logo or Bootloop

A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try again to install Custom Rom.

automatically disconnecting during flashing Acer phone 

Try another data cable.
Try to install Drivers again

I can’t Flash Custom Rom Acer phone

please try again. after did, if does not works then leave a comment with error message. Had better give us Screenshot. 

My phone keep restarting

  • That means your current Rom is Corrupted or damaged. Now you have to Install Custom Rom to ON your phone. use this post to Flash new Custom Rom. If you can, use different Rom.
  • It may be your phone case is pressing on it

PMT changed Error

  • Try to format your phone using Sp flash tool,
  • Find another Rom
  • If not works, then open the scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”

Other error messages and Solutions ..

Below we listed errors of SP Flash tool and there is a link to fix these errors.  Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize scatter failed,Error 0X411,

BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005),
BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)

S_FT_DA_NO_RESPONSE or 
BROM ERROR : S_DA_SDMMC_WRITE_FAIError
8038! Android download  pmt is ready and layout has been changedLED

BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00,
BROM ERROR: S_TIMEOUT (1042)
BROM ERROR : S_FT_DA_NO_RESPONSE (0xFA1)
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

If you face this kind of error message then this is the face for fix it. Go to this  dedicated post



If this Flashing Acer phone guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.